|
Ammco 901175
|
|
Ammco 901180
|
|
Ammco 902500
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Clip On 4 Inch Rotor Silencer
|
Ammco Brake Lathe Deluxe Clip On 8 Inch Rotor Silencer
|
Ammco Brake Lathe Bench Kit With Back Board & Chip Catcher- For All Ammco Lathes, standard with back board and chip catchers |
|
|
|
Ammco 902760
|
|
Ammco 903085
|
|
Ammco 903086
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe SAE Rotor Micrometer
|
Ammco Brake Lathe Spindle Polyethylene Boot
|
Ammco Brake Lathe Drum Feed Boot
|
|
|
|
Ammco 9030871
|
|
Ammco 903101
|
|
Ammco 903481
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Cross Feed Boot
|
Ammco Brake Lathe Arbor Cap 100 lbs With Arbor Nut - For Models 2002,3000, 4000
|
Ammco Brake Lathe Heavy Duty Arbor 1 7/8 Inch
- Truck Rotors and Drums Up To 200lbs - For Models 2002,3000,4000,4100,7000,7500,7700 |
|
|
|
Ammco 904725
|
|
Ammco 904775
|
|
Ammco 905280
|
|
|
|
|
|
|
|
Ammco Brake Lathe Positive Rake Heavy Duty Tool Bit 1/2 Inch
|
Ammco Brake Lathe Heavy Cone Set - Use With #1081, #3481, & #5748 Arbors, includes sets 8994 & 8995, Center holes from 2.75-8.17" in.
|
Ammco Brake Lathe Drum Silencer Band - Drum: 1 3/4 in. Wide
|
|
|
|
Ammco 905290
|
|
Ammco 905392
|
|
Ammco 906854
|
|
|
|
|
|
|
|
Ammco Brake Lathe Truck Drum Silencer Band 2.75 Inch
|
Ammco Brake Lathe Negative Rake Tool Bit Assembly 5/8 x 3/4 Inch
|
Ammco Brake Lathe Red Knob
|
|
|
|
Ammco 90691410
|
|
Ammco 9069142
|
|
Ammco 9069186
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Negative Rake Carbide Inserts
|
Ammco Brake Lathe Negative Rake Carbide Inserts (.032" Radius)
|
Ammco Brake Lathe Positive Rake Carbide Inserts
|
|
|
|
Ammco 906920
|
|
Ammco 906921
|
|
Ammco 906922
|
|
|
|
|
|
|
|
Ammco Brake Lathe Ventilated Rotor Silencer Band- For Ventilated Rotors, Standard, 31 in. Long |
Ammco Brake Lathe Rotor Silencer Band- Non-Vented: Rotor - 6.500 in. (165.10mm) Diameter - 2/Pack |
Ammco Brake Lathe Rotor Silencer Band- Non-Vented: Rotor - 9.250 in. (234.95mm) Diameter - 2/Pack |
|
|
|
Ammco 906936
|
|
Ammco 906999
|
|
Ammco 907075
|
|
|
|
|
|
|
|
Ammco Brake Lathe Specialty Cross Feed Extension- Used to increase a lathe's maximum rotor diameter capacity up to 5.0 in.
- "sets back" the twin cutter
- may be used on lathe models 4000, 4100, and 7500 equipped with twin cutter models 6950 or 7900 |
Ammco Brake Lathe Negative Rake Tool Holder Set
- One #10701 (RH) & One #10702 (LH)
|
Ammco Brake Lathe Rotor Friction Silencer- Rotor, Friction: For Models 4000,4100,7500 |
|
|
|
Ammco 907996
|
|
Ammco 907999
|
|
Ammco 908545
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Shear Gear
|
Ammco Brake Lathe Positive Rake Tool Holder Set
- #25968 RH & #25969 LH Tool Bits w/Inserts
|
Ammco Brake Lathe Digital Drum Micrometer
|
|
|
|
Ammco 908994
|
|
Ammco 908995
|
|
Ammco 909183
|
|
|
|
|
|
|
|
Ammco Brake Lathe Heavy Cone Set- Use With #1081, #3481, & #5748 Arbors, Center holes from 2.75-6.03 in.
|
Ammco Brake Lathe Heavy Cone Set- Use With #1081 & #3481 Arbors, Center holes from 5.97-8.17 in.
|
Ammco Brake Lathe Non Asbestos Replacement Pressure Pads
|
|
|
