|
Ammco 1475
|
|
Ammco 4000B
|
|
Ammco 4000E
|
|
|
List Price: $8,699.95 Our Price: $7,899.95 Save $800.00!
|
|
|
List Price: $9,799.95 Our Price: $8,699.95 Save $1,100.00!
|
|
|
|
|
|
Ammco Deluxe Brake Washer- Low pressure pneumatic pump - Compressed air supply filter and coalescing filter maximize pump life - 3-stage filtration of brake cleaning solution - Reusable oil absorbent boom removes oil and contaminants - Economical water-based biodegradeable cleaning solution - Heavy duty polyethylene 10 gal. tank - Hang-on parts basket |
Ammco Combination Lathe for Brake Drums and Rotors- Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds. - Feed slide protection keeps travel surfaces free of dirt and chips. - Negative rake tool bits standard, provide lower cost of ownership. - Solid twin cutter tool simultaneously resurfaces both sides of rotor. - Infinitely variable drum feed from 0.002 inches to 0.02 inches per revolution. - Quick drum-to-rotor changeover. - User-friendly ergonomics. - Supports drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
|
Ammco Digital Combination Lathe for Brake Drums and Rotors- Custom digital finishes – By digitally controlling the feed rates, it’s easier to find that sweet spot for your particular application, giving you the highest possible quality finish available. - Shift on the fly 3-speed – The 4000E is the first lathe with an integrated, synchronous gearbox and shifter. Now you can choose the speed that makes the most sense for your work piece, right at your fingertips. - Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds. - Feed slide protection keeps travel surfaces free of dirt and chips. - Positive rake tool bits allow for low-pressure, precise turning that produces superior machined surfaces with less chatter, every time; negative rake tool bits are also included. - Solid twin cutter tool simultaneously resurfaces both sides of rotor. - Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero. - Extended spindle increases drum capacity to 9.875 inches. -Full-drum support hex boring bar guarantees correct tool angle for drums.
|
|
|
|
Ammco 4000SP
|
|
Ammco 4100B
|
|
Ammco 900001
|
List Price: $6,699.95 Our Price: $6,299.95 Save $400.00!
|
|
|
List Price: $9,499.95 Our Price: $8,799.95 Save $700.00!
|
|
|
|
|
|
|
Ammco Single Pass Lathe - One-pass finishes – One-pass design provides exceptional rotor finish. - Single-speed rotation and feeds – Simple operator use, with no adjustments necessary. - Positive rake tool bits create precisely machined surfaces that meet or exceed OE specifications. - Quick drum to rotor changeover – Converts from drums to rotors in less than 30 seconds; with optional arbor, can machine drums to 200 pounds. - Solid twin cutter tool simultaneously resurfaces both sides of rotor. - Feed slide protection keeps travel surfaces free of dirt and chips. - Full-drum support hex boring bar guarantees correct tool angle for drums.
|
Ammco Medium Duty Combination Lathe for Brake Drums and Rotors- Ideal for medium-duty truck service. - Extended spindle increases drum capacity to 9.875". - Three adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger ones. - Two feed rates allow for quick rough-cut and finer finish-cut settings. - Speed control gives operators a quality finish in less time. - Adjustable-bar twin cutter provides the greatest range of settings from small cars to 5-ton applications
|
Ammco Brake Lathe Adapter Kits For Passenger Cars (Cone Based)- For most car applications. 1 in i.d., includes 9232, 3125, 9492, 9311
|
|
|
|
Ammco 900002
|
|
Ammco 900003
|
|
Ammco 900006
|
|
|
|
|
|
|
|
Ammco Brake Lathe Adapter Kits For Passenger Cars & Light Trucks (Cone Based)- For most car and light truck through half ton applications. 1 in i.d., includes 9232, 3125, 9492, 9310 |
Ammco Brake Lathe Adapter Kits For Passenger Cars & Light Trucks (Cone Based)- For most car and light truck through one ton applications. 1 in i.d., includes 9232, 3125, 9492, 9310, 9313, 9233 |
Ammco Brake Lathe Adapter Kits For Passenger Cars & Light Trucks (Chuck Based)- For most car and light truck, through one ton applications; uses a double check to replace many cones. 1 in i.d., includes 9232, 3125, 9492, 41412, 9233 |
|
|
|
Ammco 900007
|
|
Ammco 901175
|
|
Ammco 901180
|
|
|
|
|
|
|
|
Ammco Brake Lathe Extended Adapter Kits For Passenger Cars, SUV & Light Trucks (Chuck Based)- Extended car and light truck kit. Includes all items in kit 6E plus the popular specialty adapters. 40928, 5000010 and 6936 cross feed extension |
Ammco Brake Lathe Clip On 4 Inch Rotor Silencer
|
Ammco Brake Lathe Deluxe Clip On 8 Inch Rotor Silencer
|
|
|
|
Ammco 902500
|
|
Ammco 902760
|
|
Ammco 90276050
|
|
|
|
|
|
|
|
Ammco Brake Lathe Bench Kit With Back Board & Chip Catcher- For All Ammco Lathes, standard with back board and chip catchers |
Ammco Brake Lathe SAE Rotor Micrometer
|
Ammco Brake Lathe Metric Rotor Micrometer
|
|
|
|
Ammco 903085
|
|
Ammco 903086
|
|
Ammco 9030871
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Spindle Polyethylene Boot
|
Ammco Brake Lathe Drum Feed Boot
|
Ammco Brake Lathe Cross Feed Boot
|
|
|
|
Ammco 903101
|
|
Ammco 903481
|
|
Ammco 904725
|
|
|
|
|
|
|
|
Ammco Brake Lathe Arbor Cap 100 lbs With Arbor Nut - For Models 2002,3000, 4000
|
Ammco Brake Lathe Heavy Duty Arbor 1 7/8 Inch
- Truck Rotors and Drums Up To 200lbs - For Models 2002,3000,4000,4100,7000,7500,7700 |
Ammco Brake Lathe Positive Rake Heavy Duty Tool Bit 1/2 Inch
|
|
|
|
Ammco 904775
|
|
Ammco 905280
|
|
Ammco 905290
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Heavy Cone Set - Use With #1081, #3481, & #5748 Arbors, includes sets 8994 & 8995, Center holes from 2.75-8.17" in.
|
Ammco Brake Lathe Drum Silencer Band - Drum: 1 3/4 in. Wide
|
Ammco Brake Lathe Truck Drum Silencer Band 2.75 Inch
|
|
|
|
Ammco 905392
|
|
Ammco 906854
|
|
Ammco 90691410
|
|
|
|
|
|
|
|
Ammco Brake Lathe Negative Rake Tool Bit Assembly 5/8 x 3/4 Inch
|
Ammco Brake Lathe Red Knob
|
Ammco Brake Lathe Negative Rake Carbide Inserts
|
|
|
|
Ammco 9069142
|
|
Ammco 9069186
|
|
Ammco 906920
|
|
|
|
|
|
|
|
|
Ammco Brake Lathe Negative Rake Carbide Inserts (.032" Radius)
|
Ammco Brake Lathe Positive Rake Carbide Inserts
|
Ammco Brake Lathe Ventilated Rotor Silencer Band- For Ventilated Rotors, Standard, 31 in. Long |
|
|
