Join our mailing list!





You are here: Home > Service Lifts & Alignment Systems
Choose a sub category:
Specialty Lifts Two Post Lifts
Alignment Lifts Bridge Jacks
Alignment Equipment Alignment Service Replacement Parts
Shop tire alignment equipment, car tire lifts, replacement parts, and more at Vampa Tire Supplies. All of our products will make repairs easier, and because they’re manufactured from tough materials, they’re also sure to last.

We strive to keep our prices as low as they can possibly be; we value our clients, and we do our absolute best to equip their shops with affordable products that they can depend on.

Browse our large selection of tire alignment equipment to find the ideal parts and tools for your needs. We’re dedicated to your complete satisfaction. If you require assistance or have any questions, please contact us.
Sort By:
Page of 3
Bendpak 5215508 Bendpak 5585435 Hydraulic Power Unit Bendpak Extra Tall XPR-10AXLS
Our Price: $80.00
Our Price: $515.00
Our Price: $3,985.00
Bendpak 5215508 Bendpak 5585435 Hydraulic Power Unit Bendpak Extra Tall XPR-10AXLS
Bendpak Adjustable Screw Lift Pad With Recievers For 2 Post Lifts
Bendpak LR-60 Lift Hydraulic Power Unit
- 1.6 Gal Reservoir
- 1.5 Hp Motor
- 110-230V 50/60 1 Ph

Bendpak Asymmetric Extra Tall 10,000 Lbs Two Post Clear Floor Lift 157 in. Overall Height
- 10,000-lb. lifting capacity
- Lift arms shown with optional foot guards
- Top beam accommodates wide or narrow con guration
- Double-telescoping screw pads o er increased versatility
- Padded overhead safety shuto bar
- Single-piece columns
- Dual hydraulic direct-drive cylinders
- Oversized 59” tall carriage for superior strength
- Electric / hydraulic power system
- Large, 17” x 19” A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearings
- Single-point safety release
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- ALI certified
Bendpak HD-9AE Bendpak HDS-14LSX Bendpak HDS-18EA
Our Price: $5,160.00
Our Price: $7,115.00
Our Price: $16,650.00
Bendpak HD-9AE Bendpak HDS-14LSX Bendpak HDS-18EA
Bendpak Alignment Lift 9,000 Lbs
-
9,000-lb. maximum lifting capacity
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN-1493
- Multi-caster slip plates
- Dual radius plate positions
- Heavy-duty stainless steel lifting cables
- Dual-hub cable sheaves
- Grease nipples on every sheave and sheave axle
- Single hydraulic cylinder
- Integrated hydraulic ow restrictor
- Durable powder-coat nish
- Spring-loaded safety locks
- Simple push-button lock release
- Aircraft-quality stainless steel and aluminum pneumatic cylinders
- Secondary lock system
- Fully enclosed cables, airlines, safety latches and sheaves
- Multiple adjustable height locking positions
- Maintenance-free power system
- Easy-to-reach operator controls
- Non-skid runways
Bendpak 14,000 Lbs Extended Alignment Lift
- 14,000 pound lifting capacity
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN 1493
- Two runway lengths to choose
- Heavy-duty turn plates and integrated rear slip-plates
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
- Multi-position safety locks in each column with push- button safety release
- Runways adjust for di erent tread widths and feature non-skid surface
- Optional 7,000-lb. capacity bridge jacks available
Bendpak Alignment Lift 18,000 Lbs
- 18,000-lb. lifting capacity
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN-1493
- Multi-caster slip plates
- Spring-loaded automatic safety locks
- Supersized 12” diameter cable sheaves
- Four stainless steel lifting cables
- Grease nipples on every sheave and axle
- Single hydraulic under-runway cylinder
- Integrated hydraulic ow restrictor
- Durable powder coat nish- Push-button pneumatic lock release
- Secondary lock system on constant guard
- Enclosed cables, airlines, safety latches
- Multiple adjustable locking positions
- Maintenance-free power system
- Conveniently located controls
- 12” x 12” base plates
- Non-skid runways
- Optional rolling jacks available

Bendpak HDSO-14AX Bendpak High Rise XPR-10XLS Bendpak LR-5T
Our Price: $10,030.00
Our Price: $3,860.00
Our Price: $2,870.95
Bendpak HDSO-14AX Bendpak High Rise XPR-10XLS Bendpak LR-5T
Bendpak 14,000 Lbs Extended Open Front Alignment Lift
- 14,000 pound lifting capacity
- Two runway lengths to choose
- Heavy‐duty turn plates and integrated rear slip‐plates included
- Multi‐position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail‐kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Features oversize sheaves and heavy‐duty 1/2” aircraft cable
- Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
- Multi‐position safety locks in each column with push‐button safety release
- Runways adjust for different tread widths and feature non‐skid surface
- Optional 7,000 pound capacity bridge jacks available
Bendpak Symmetric High Rise 10,000 Lbs Two Post Clear Floor Lift 157 in. Overall Height
- Lift arms shown with optional foot guards
- 10,000-lb. lifting capacity
- Expandable top beam accommodates wide or narrow con guration
- Double-telescoping screw pads o er increased versatility
- Padded overhead safety shuto bar
- Single-piece columns
- Dual hydraulic direct-drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Single-point safety release
- Safety locks in each column spaced every 3"
- Automatic overhead shuto
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- ALI Certified
Bendpak 10,000 Lbs Low Rise Lift
- Each lift platform features four parallelogram frame support bars making it the strongest 10,000-pound low-rise lift in its class
- Drive-over ramps and side rails provide an increased width to support wider vehicles during approach
- Comes standard with a durable full length rubber-topped lifting platform and eight multi-height rubber topped adapters for increased vehicle contact versatility
- Storage trays are conveniently placed on each side of the lift platform to prevent wheel lug nuts and other small parts from being misplaced
- Dual hydraulic cylinders provide a stable 10,000-pound lifting capacity to accommodate a wide range of vehicles
- Diamond plated approach ramps help to prevent slipping
- Thee locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
- A hands-free safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles
- Powder coat finish provides a long lasting durable finish
Bendpak LR-60 Bendpak LR-60P Bendpak P-9000LT Pit Lift
Our Price: $1,945.00
Our Price: $1,975.00
Our Price: $3,655.00
Bendpak LR-60 Bendpak LR-60P Bendpak P-9000LT Pit Lift
Bendpak 6,000 Lbs Low Rise Lift
- 6,000-lb. lifting capacity
- Electric / hydraulic power system
- Multi-position safety locks
- Rubber lifting blocks included
- Dropped cross bar for added clearance
- Heavy-duty steel channel frame
Bendpak 6,000 Lbs Portable Low Rise Lift
- 6,000-lb. lifting capacity
- Tow handle makes it easy to move lift from bay to bay
- Electric / hydraulic power system
- Multi-position safety locks
- Rubber lifting blocks included
- Dropped cross bar for added clearance
- Heavy-duty steel channel frame
Bendpak 6,000 Lbs Pit Style Low Rise Lift
- Easily convert fast-lube pits into wheel service work bays
- Mounts outside the pit rail without interfering with center work area
- Model P-9000F ush-mount model provides recessed drive-over option
- Heavy duty 1.5 HP electric-hydraulic power unit
- Electronic push-button controls allow smooth, single- hand operation
- Automatic multi-position safety locks with air release deliver safe, remote operation
- Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
Bendpak RBJ15000 Bendpak RBJ4500 Bendpak RBJ7000
Our Price: $3,255.00
Our Price: $1,435.00
Our Price: $1,635.00
Bendpak RBJ15000 Bendpak RBJ4500 Bendpak RBJ7000
Bendpak 15,000 Lbs Rolling Bridge Jack
- 15,000-lb. lifting capacity
- Steel lifting pads standard
- High-pressure hydraulic power unit
- Optional air-line kit
- Stackable adapters
Bendpak 4,500 Lbs Rolling Bridge Jack
- 4,500-lb. lifting capacity
- Steel lifting pads standard
- Optional rubber lifting pads
- High-pressure hydraulic power unit
- Optional air-line kit
- Stackable adapters
Bendpak 7,000 Lbs Rolling Bridge Jack
- 7,000-lb. lifting capacity
- Steel lifting pads standard
- Optional rubber lifting pads available
- High-pressure hydraulic power unit
- Optional air-line kit
- Stackable adapters
Bendpak RBJ9000 Bendpak XPR-10AS Bendpak XPR-10S
Our Price: $2,110.00
Our Price: $3,435.00
Our Price: $3,380.00
Bendpak RBJ9000 Bendpak XPR-10AS Bendpak XPR-10S
Bendpak 9,000 Lbs Rolling Bridge Jack
- 9,000-lb. lifting capacity
- Steel lifting pads standard
- Optional rubber lifting pads
- High-pressure hydraulic power unit
- Optional air-line kit
- Stackable adapters
Bendpak Asymmetric 10,000 Lbs Two Post Clear Floor Lift 145 in. Overall Height
- 10,000 Lb Lifting Capacity
- Expandable top beam
accommodates wide or narrow drive thru configuration.
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Exclusive Tru-Metric arm design for more versatile arm positioning
- 30° rotated single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Automatic arm restraints
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63mm stackable adapter set comes standard
- Triple-telescoping arm design
- ETL Approved
Bendpak Symmetric 10,000 Lbs Two Post Clear Floor Lift 145 in. Overall Height
- Expandable top beam for wide or narrow drive-thru
- Double-telescoping screw pads o er increased versatility
- Padded overhead safety shuto bar
- Telescoping arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Large, 17” x 19” A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Triple-telescoping arm design
- Versatile drop-in contact pads with stackable adapters
- ETL Approved
Bendpak XPR-12CL Bendpak XPR-12FDL Bendpak XPR-15CL
Our Price: $5,210.00
Our Price: $5,285.00
Our Price: $8,855.00
Bendpak XPR-12CL Bendpak XPR-12FDL Bendpak XPR-15CL
Bendpak Symmetric 12,000 Lbs Two Post Clear Floor Lift 170 in. Overall Height
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shuto bar
- Extended height top-beam provides greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
-
Triple-telescoping arms provide increased range
Bendpak Symmetric 12,000 Lbs Two Post Floor Plate Lift 144 in. Overall Height
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shuto bar
- Extended height top-beam provides greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53” tall carriage for superior strength- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
- Triple-telescoping arms provide increased range
Bendpak Symmetric 15,000 Lbs Two Post Clear Floor Lift 170 in. Overall Height
- 15,000-lb. lifting capacity
- Padded overhead safety shuto bar
- Extended height top-beam provides greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- Multi-piece adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads.
- Ideal for trucks and vans with running boards or auxiliary fuel tanks.
- Convenient storage is included for truck and van adapters
- Versatile drop-in contact pads with stackable adapters
Bendpak XPR-18CL Bendpak XPR-9S Bendpak XR-12000A
Our Price: $9,710.00
Our Price: $3,445.00
Our Price: $14,655.95
Bendpak XPR-18CL Bendpak XPR-9S Bendpak XR-12000A
Bendpak Symmetric 18,000 Lbs Two Post Clear Floor Lift 170 in. Overall Height
- 18,000-lb. lifting capacity
- Padded overhead safety shuto bar
- Extended height top-beam provides greater clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- Multi-piece adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
- Convenient storage is included for truck and van adapters
- Versatile drop-in contact pads with stackable adapters
Bendpak Symmetric 9,000 Lbs Two Post Floor Plate Lift 113 in. Overall Height
- 9,000-lb lifting capacity
- CE Approved and Certi ed. Meets or exceeds the standards prescribed by European Standard EN 1493
- Shorter column for low-ceiling installations
- Adjust able wide or narrow drive-thru con gurations
- Extended rise gives you over 6 feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain-lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20” x 19” steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Dual 3/8” equalizer cables with oversized cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
Bendpak 12,000 Lbs Quatra Scissors Alignment Lift
- 12,000-lb. lifting capacity
- Extended runway design for greater vehicle capacity
- Integrated recessed full-floating front radius plates and over-sized rear slip-plates
- Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
- Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
- Extendable, hinged, collapsible, and stowable approach ramps
- Multi-position runway work steps
- Non-skid runways provide sure grip for vehicles and technicians
- Dependable electric/hydraulic power system
- Cylinders feature integrated velocity fuses to control sudden descent
- Power console features simple operator controls
- Open front design with clear center, sides and rear
- Multi-position automatic leveling system
- Quad automatic safety locks with pneumatic push-button release
- Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
- Lubricated-for-life bearings on all pivot points
- Rugged steel legs and formed steel runways
- Turned, ground, polished and hardened zinc plated axle pins
- Grease nipples on all moving pins and bearings
- High efficiency hydraulic power unit provides faster raising and descent times
- Easy access to hydraulic/electrical components for simple routine servicing
- Easy to use and understand operator controls
- Power unit console with easy access front panel
- Can be flush mounted or recessed
Cemb DWA 1000XL Cemb DWA 1000XLT Cemb DWA 4000
Our Price: $9,499.95
Our Price: $15,299.95
Our Price: $15,999.95
Cemb DWA 1000XL Cemb DWA 1000XLT Cemb DWA 4000
Cemb USA Wireless Deluxe Wheel Alignment System
CEMB's DWA 1000 total vehicle wheel alignment machine improves safety and driver comfort, reduces fuel consumption and tire wear. Comes fully assembled.

- 8 sensor CCD technology
- DSP processing
- Four shock resistant BT2 wireless rechargeable alignment heads with charging station standard
- Featherweight alignment heads. Only 5.75 lbs each
- Lithium ion batteries for long life
- MEMS static accelerometers provide the latest in measuring technology (newest measuring technology)
- 24 in. wheel clamping range (30 in. optional)
- Laptop computer and storage cabinet standard
- Windows based software with multiple languages
- Spoiler mode
- Complete vehicle and customer database with alignment specification 30 years
- User friendly software to guide technician
- Color printer
- 23 in. LCD monitor

Cemb USA Wireless Heavy Truck Wheel Alignment System
CEMB's DWA 1000 total vehicle wheel alignment machine improves safety and driver comfort, reduces fuel consumption and tire wear. Comes fully assembled.
- 8 sensor CCD technology
- DSP processing
- PC computer, keyboard and storage cabinet standard
- Four shock resistant BT2 wireless rechargeable truck alignment heads with charging station standard
- Featherweight alignment heads. Only 7.5 lbs each
- Lithium ion batteries for long life
- MEMS static accelerometers provide the latest in measuring technology (newest measuring technology)
- 30 in. wheel clamping range
- Windows based software with multiple languages
- Complete vehicle and customer database for Heavy Duty truck with alignment specification 30 years
- User friendly truck software alignment program
- Handles up to seven truck axles
CEMB DWA4000HD 3D HiDef Alignment System
CEMB's new image technology alignment machine is a quality product at an affordable price. It comes with onsite training in the Continental US and full one year parts and labor warranty.

- Cameras Two 3-D High Definition Camera
- Measures All Adjustable Alignment Angles
- Set-Back and SAI for Diagnostic
- Camera Boom Automatically Adjusts to Lift Height
- Less Distance Required for Camera Boom to Front of Lift
- CEMB Fast and User-Friendly Alignment Program
- 40 Plus Years of Vehicle Specification
- Clamps Four Point Self-Centering, Universal Grip
- Fits Most OEM Wheels
- Targets with No Electronics
- Targets with Reduced Size and Weight
- Direct Shut-down Technology: forget the need to shot down Widows before turning off the master switch.
Corghi Exact 70 CCD Alignment System Corghi Exact Linear 3D Alignment System Specialty Products 23181
List Price: $15,499.95
Our Price: $13,799.95
Save $1,700.00!
List Price: $13,499.95
Our Price: $12,499.95
Save $1,000.00!
Our Price: $9.95
Corghi Exact 70 CCD Alignment System Corghi Exact Linear 3D Alignment System Specialty Products 23181
Corghi Exact 70 Wheel Alignment System W/ 8-CCD Camera Sensor Heads
- EXACT PLUS, the Corghi wheel alignment program for the most demanding professional. EXACT PLUS works with the Windows XP EMBEDDED operating system. Clear, intuitive graphics, userfriendly, complete and customisable.
- Manual toe curve measurement and adjustment procedure.
- Push-type, 2 and 3 point and single sensor ROC and ROC skip option.
- Car and van databank with more than 18,000 vehicles. Optional truck and bus databanks with more than 3,000 vehicles.
- “Easy Caster”: quick caster measurement with no brakes on sensor heads
- Animated tutor guides preparation of vehicle for alignment
- “Quick Check”: complete 2-head front axle measurement and adjustment procedure
- Cradle Adjustment
- Quick job record data input
- Continuous sensor calibration checking.
Optional Procedures Available
- Truck and trailer procedure
-
Adjustment help, schematic slides or animations
Corghi Exact Linear 3D Alignment System
- Icon user friendly graphics that is simple and easy to learn, fast to select
- Practical trolley for clamp and sensor holder
- Unique high resolution 80x80 and 80x90 target board
- Next generation camera with high resolution HiQ Lenses
- Live chassis measurements with live graphic indication
- International database by world regional area for easy selection
- Selectable tutor online that follows the operator step by step
-
Specialty Products Ford Camber/Caster Sleeve
- 2WD (0.25 degree) / 4WD (0.20 degree)