|
|
|
|
|
|
|
|
|
|
|
TSISSG Cheetah Bead Seater Discharge Valve
|
TSISSG Expandable Rims - 13 to 16 in. dia. by 6 3/8 in. width Expanding Rim
|
TSISSG Expandable Rims - 13 to 16 in. dia. by 8 in. width Expanding Rim
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Expandable Rims - 14 to 17 in. dia. by 7 1/8 in. width Expanding Rim
|
TSISSG Expandable Rims - 17 to 20 in. dia. by 8 1/4 in. width Expanding Rim
|
TSISSG Expandable Rims - 20 to 22.5 in. dia. by 9 in. width Expanding Rim
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Expandable Rims - 22 to 24.5 in. dia. by 9 in. width Expanding Rim
|
TSISSG Expandable Rims - 20 to 22.5 in. dia. by 11 3/4 in. width Expanding Rim
|
TSISSG Expandable Rims - 22 to 24.5 in. dia. by 13 3/8 in. width Expanding Rim
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Expandable Rims - 14 to 17 in. dia. by 10 1/2 in. width Expanding Rim
|
TSISSG Expandable Rims - 17 to 20 in. dia. by 10 in. width Expanding Rim
|
TSISSG Amermac Racing Tire Truer - The 1200R Amermac Tire Truer is specifically designed for racing tires and racing applications. - The 1200R produces a flat cut surface or the unit can be adjusted to cut on a camber and can produce a camber cut of up to 5 degrees. - The 1200R Amermac Tire Truer comes with one adapter plate to your specifications. - The 1200R Tire Truer is capable of shaving a tire up to 18" wide and wheels sizes up to 24.5 in. - Optional Automatic Cross-Feed Control and Tire Air Lift Ramp is also available. - Built and designed for low maintenance operation - Built-in tire centering gauge - Ball bearing blade motor with fixed shaft prevents tire gouging - Automatic sharpening blade with manual override - Safety blade guard - Minimum set up time needed for fast one person operation - Simple master control panel designed for easy operator use - Large wheel weight storage tray - Adjustable work light - Adapter plates available to fit most wheel lug patterns - Optional Air Jack Wheel Lifting Ramp available - Optional Automatic Cross-Feed control available -60 hz., 110-115 V. Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Amermac Port Truer - The Amermac model 405-W Porta Truer is designed to handle bus, truck, trailer, passenger car, light truck and racing tire applications. - Fast, accurate and dependable, the heavy duty 405-W Porta Truer is designed to roll up to any vehicle and true the tire without removing the wheel. - The versatile design means the entire job can be completed within a matter of minutes. - Truing the tire on wheel bearings insures absolute accuracy. - Versatile, low maintenance design - Folding handle design for compact storage - Built-in tire profile follower - Cuts up to 17.5 in. wide on a 24 in. profile - Adjustable work light - Self sharpening blade with manual override and safety blade guard - Includes scooter seat with wheel weight travel - 14 foot power cord - Self sharpening blade with manual override and safety blade guard - Includes scooter seat with wheel weight tray - 14 foot power cord - 60hz., 110-115V, Single Phase
|
TSISSG Amermac Electronic Strobe Balancer - Strobe Wheel Balancers have been around for years, and there is no more accurate way to balance a tire and wheel assembly than on the vehicle.
- When balancing a tire and wheel assembly on the vehicle you are also balancing the rotor or drum and hub assembly which insures a better balance.
- Strobe balancing a wheel and tire is more accurate than using conventional methods.
- The Amermac 501-A Electronic Strobe Balancer is the companion component to the Amermac 525 Wheel Spinner.
- The Amermac 501-A Electronic Strobe Balancer delivers fast precision balancing on the vehicle.
- No special wheel attachments are required. The flashing strobe indicator pin points exact placement of wheel weights. Balancing jobs go out faster.......you profit more!
|
TSISSG Amermac Heavy Duty Wheel Spinner - The low profile 525 Amermac Wheel Spinner allows for easy access under lower body style cars and trucks.
- Completely portable the 525 Amermac Wheel Spinner will handle passenger cars all the way up to heavy duty truck applications, including rear wheels and drive duals.
- The Amermac 525 Wheel Spinner is available in either 7.5 H.P., 220 Volt, 3 Phase or 5 H.P., 220 Volt, Single Phase.
Specifications: 44 in. length x 39 in. weight x 30 in. height; 340lbs shipping weight
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG CH-22 Small Tire Adapter Mount & Demount Tool - The CH-22 Multi-Tire Changer makes the job easy, fast and economical! - No other Multi-Tire Changer works as well as the CH-22, we GUARANTEE it! - Everything you need to change 4 to 16.5 in. tires comes with the CH-22 manual tire changer. - The CH-22 Multi- Tire Changer accommodates most all wheels including open hub and bearing wheels. - Also included with the CH-22 is the patented CH-4 Mongoose Tire Tool! - Don't turn away any more small tire and wheel business. - Add new business, new customers and more profit today with the CH-22 Multi-Tire Changer.
|
TSISSG CH-23 Tire Changing Stand With Bead Breaker - The CH-23 Tire Changing Stand includes a bead breaker for breaking the most difficult tire beads. - The CH-23 Tire Changing Stand includes a leverage bar for the bead breaking attachment. - This Tire Changing Stand is the perfect complement to the popular CH-21 or CH-22 Tire Changer. - Mount either unit on top of this stand for a complete Tire Changing Station. - Storage areas on the stand add convenience and the bead breaker feature allows for a one stop durable station.
|
TSISSG Steel Tank Cheetah Bead Seater - The CH-5 Cheetah bead seater makes seating the most difficult bead not only safe but simple, fast and economical. - Designed for commercial use on all tires ATV to 24.5 in. truck tires the CH-5 Cheetah® - Bead Seater takes the work out of seating tire beads. - A simple charge of the tank is all it takes to seat the most difficult tire beads. - The CH-5 Cheetah® Bead Seater has a 5 gallon ASME certified steel tank.
Replacement Parts Available Call For Details
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Aluminum Tank Cheetah Bead Seater - The CH-5AL Cheetah bead seater makes seating the most difficult tire beads not only safe but simple, fast and economical. - The CH-5AL is designed for commercial use on all tubeless tires from ATV to 24.5 in. truck tires. - The CH-5AL Cheetah® Bead Seater has a 5 gallon ASME certified aluminum tank.
Replacement Parts Available Call For Details
|
TSISSG Safety-Flate Inflation System - The CHR-1 Cheetah® Safety-Flate was developed for fleet service application. - No guesswork, or inconsistency, when inflating 1 - 4 tires at a time. - Do it with precision and safety using the pre-set inflation gauge and regulator assembly. - Constructed of high strength steel the CHR-1 Cheetah® Inflation System is built for heavy shop use and years of dependable service. - Compact and light weight, the CHR-1 has features not available in other inflation tools. - Using a 3/8 in. high volume, high flow regulator, the CHR-1 quickly and acccurately inflates up to four tires at the same time to the pre-set PSI. - The CHR-1 is equipped with special couplers and four 10 ft. hoses.
|
TSISSG 12 CFM Nitrogen Inflation System 60 Gallon - The NG-12 Nitrogen Inflation System is ideal for high volume shops. - This 12 CFM nitrogen generator uses the highest quality membrane and comes standard with a 60 gallon nitrogen storage tank. - Each system utilizes the highest quality membranes. - Larger tanks are available in 120 gallon and 240 gallon capacities. - The benefits of nitrogen tire inflation rather than plain air have been enjoyed by Formula One, NASA, NASCAR, earthmoving equipment, US Military and Tour de France racers for years.
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG 4 CFM Nitrogen Inflation System 60 Gallon - The NG-4 Nitrogen Inflation system is our most affordable unit. - This 4 CFM nitrogen generator uses the highest quality membrane and comes standard with an internal 60 gallon nitrogen storage tank. - All TSISSG systems utilize the highest quality membranes. - The benefits of nitrogen tire inflation rather than plain air have been enjoyed by Formula One, NASA, NASCAR, earthmoving equipment, US Military and Tour de France racers for years. - Thanks to TSI these affordable generating systems are now available to the general public.
|
TSISSG 6 CFM Nitrogen Inflation System 60 Gallon - The NG-6 Nitrogen Inflation system is ideal for shops. - This 6 CFM nitrogen generator uses the highest quality membrane and comes standard with a 60 gallon nitrogen storage tank. - Each system utilizes the highest quality membranes. - Larger tanks are available in 120 gallon and 240 gallon capacities.
|
TSISSG Tire Siping Machine - Designed exclusively for passenger car and light truck tires, the SP Siper is priced to fit a smaller budget. - No accessories are required making this unit perfect for many applications. - Designed to accommodate mounted tires the SP Siper is built to last, giving many years of dependable service. - It's easy to operate with training provided. - It's fast; the process takes only 3 to 4 minutes per tire to perform. - Most tires can be Siped! - Drivers everywhere are asking for siping because it's proven ability to increase overall tire performance. - If you are not offering tire siping you're losing money and possibly customers.
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Saf-Tee Siper - Designed exclusively for passenger car and light truck tires, the SP Siper is priced to fit a smaller budget. - No accessories are required making this unit perfect for many applications. - Designed to accommodate mounted tires the SP Siper is built to last, giving many years of dependable service. - It's easy to operate with training provided. - It's fast; the process takes only 3 to 4 minutes per tire to perform. - Most tires can be Siped! - Drivers everywhere are asking for siping because it's proven ability to increase overall tire performance. - If you are not offering tire siping you're losing money and possibly customers.
|
TSISSG TC-50 Tire Cutter Gas Or Electric Powered - The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. - The TC-50 is equipped with either a 9 HP B&S commercial gas engine or a 3HP, 220 single phase electric motor. - The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. - The patented shear blades works on a zero clearance design for a clean cut. - This greatly extends the blade life compared to other designs. - Two-handle valve system keeps operator's hand away from the blades while cutting for added safety. - The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. - Complete factory training is included with each TC-50 Tire Cutter. - The TC-50 Tire Cutter is available in gas and electric power systems.
|
TSISSG TC-55 Tire Cutter Gas Or Electric Powered - The TC-55 Tire Cutter is one of our most powerful passenger and light truck tire cutting units. - Equipped with either a 10 HP, 220/440 V, 3 Phase eletric motor or a 18 HP B&S commercial gas engine with eletric start. - The small footprint allows this workhorse to easily fit in any work area. - TheTC-55 Tire Cutter is faster than its little brother the TC-50 Tire Cutter, and can handle high volumes of passenger or light truck size tires quickly. - Two-handle valve system keeps operator's hand away from the blades while cutting for added safety. - The TC-55 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. - The TC-55 will cut 17 in. and smaller tires into four (4) pieces at a rate up to 90 per hour. - Tires measuring 18 and 19 in. in diameter can be quartered at a rate up to 70 tires per hour. - Complete factory training is included with each TC-55 Tire Cutter. - The TC 55 Tire Cutter is available in both gas and electric power systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
TSISSG Tire Inspector - The TI-95 Tire Inspector is designed to inspect non mounted passenger car and light truck tires from 13 to 20 in.. - The TI-95 Tire Inspector allows the operator to inspect tires for sidewall, tread and bead leakage on non mounted tires. - The TI-95 is also ideal for checking for tire tread separation and other tire damage. - Quick and easy inspection is accomplished by using an expandable hub and expandable rim assemblies.
|
TSISSG Tire Inspector - The TI-96 Tire Inspector is designed to inspect non mounted tires from 13 to 24.5 in. using an expandable hub and rim assembly. - The TI-96 Tire Inspector allows the operator to inspect tires for sidewall, tread and bead leakage using a dunk test tank. - The TI-96 is also ideal for checking for tire tread separation and other tire damage
|
TSISSG Passenger & Light Truck Wheel Cleaner - The WC-15 Passenger & Light Truck Wheel Cleaner quickly and safely removes rust; debris and particle build up on the wheel bead and rim flange areas of the wheel. - The WC-15 will clean aluminum and steel wheels from 13 to 20 in. in rim diameter and up to 12 in. wide. - Clean bead seat and rim flange areas are necessary to insure proper seating of the tire bead and reduces the risk of air leaks at the bead. - The WC-15 is a self contained automated unit that allows an operator to safely clean the wheel without the risk of being hit by flying debris or inhaling harmful dust. - Enclosed cabinet has full range opening doors to allow easy placement of wheel into cabinet and on to drive rollers. - The WC-15 has two (2) rubber coated drive rollers that protect the rim flange and allow for wheel rotation. - Wheel face is protected from damage and scratches by a protective non marring plastic shield. - Large capacity internal vacuum system captures particles of debris and dust that come from the wheel during the cleaning process. - An internal 150 watt long life halogen lamps allows for proper illumination of the wheel during the cleaning process. - Large 6 in. diameter wire brush is powered directly by 2 hp, 3450 RPM electric motor. - A heavy duty slide system design allows proper cleaning brush position. Cleaning brush is easily positioned by two adjustable hand cranks. - Door safety switch will not permit machine operation unless door is properly closed. - Large viewing windows provide excellent operator view. - UL and ULC approved
|
|