|
|
|
|
|
|
|
|
|
|
|
Norco 10 Ton Floor Service Jack (Fast Jack) - U.S. PATENT NUMBER: 7,055,801 B2 - Chromed ram and dust seals prevent hydraulic contamination. - Safety by-pass and overload systems protect hydraulic block. - Air pump models can also be operated manually. - Includes the FASTJACK® feature which raises the jack’s lifting saddle to the load with one pump of the “T” handle. - Locking release lever secures handle in the vertical, 45 degree or horizontal position to lower the load on all models.
|
Norco 2 Ton Low Profile Floor Jack - Covered by a one year limited warranty. - Extremely low 2 3/4 in. low lift height. - Safety by-pass system protects pressure cylinder. - Safety overload system prevents jack from being used beyond its rated capacity. - Heavy duty chassis for added strength and dependability. - Long two-piece handle for easy shipping and storage. - Foam handle sleeve is included to protect vehicles from damage. - Dual pump piston design raises the jack to maximum height in 8-1/2 pump strokes. - U-joint release mechanism for more control.
|
Norco 3 Ton Lightweight Floor Jack - Double pump piston raises the saddle to the load quickly. - Safety bypass and overload systems prevent cylinder damage and prevent
the jack from being used beyond the ASME/PASE load-limiting standard. - Grab handles for positioning and carrying the jack. - Aluminum wheels.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 3.5 Ton SUV & Service Truck Floor Jack - Steel hydraulic block construction includes a double pump piston design that quickly raises the jack to the maximum height - Long, removable two piece handle with knurled hand grip provides: - Ease of pumping - Longer reach for positioning under overhang - Ease for transportation and storage - Ease of pumping in tight quarters when second handle section is removed - 4 in. low and 21-3/8 in. maximum lift heights (without saddle adapter) - 7 in. low and 24-3/8 in. maximum lift heights (with saddle adapter) - Safety by-pass system protects pressure cylinder - Safety overload system prevents jack from being used beyond its rated capacity. - Heavy-duty chassis for added strength and dependability
|
Norco 1.5 Ton Truck Transmission Jack
- Wide chassis with open front provides: - Wider opening for saddle and transmission to come lower to the ground for easy remova - Efficient load distribution and stability. - Easy access to saddle tilt knobs. - Fully adjustable universal saddle with adjustable arms to position the transmission. - Heavy duty chain with convenient chain tensioner secures load to the saddle. - Safety by-pass system prevents damage to the hydraulic cylinder. - Safety overload system prevents jack from being used beyond its rated capacity. - Full 360 degree rotating handle operates in any position. - Flash chromed ram inhibits rust from entering the hydraulic system. - Four full-swivel ball bearing caster wheels for easy positioning.
|
Norco 300 Lbs Floor Type Clutch Jack
- Clutch/flywheel removal and installation becomes a one man job. - Tilting saddle enables clutch to be positioned in either horizontal position for clearing underneath truck or vertical position for installation and removal. - Adjustment bolt on saddle aligns clutch and flywheel. - Spline shaft rotates 360 degrees, turns left and right for clutch and engine alignment. 2 in. and 1 3/4 in. spline shafts included. - Conveniently located release valve and 360 degree rotating pump handle allow jack to be operated in any work position.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 300 Lbs Telescopic Clutch Jack
- Tilting saddle activated by an integrated screw with machine handle enables the clutch to be positioned in either a horizontal position for clearing underneath truck or vertical position for installation and removal. - 2 in. and 1-3/4 in. diameter spline shafts rotate 360˚ for clutch and engine alignment. - Air/hydraulic foot pump provides hands free operation and easy, convenient lifting. - Metered pump provides safe lowering of load. - Two-stage flash chromed rams inhibit rust from entering hydraulic system. - Polyurethane wheels provide protection for tile and epoxy floors.
|
Norco 4 Ton Scissor Forklift Jack - Serrated saddle which handles flat surfaces can be rotated out of the way so edged surfaces can be raised in the rounded lift arm cutout. - 2-1/2 in. low lift height at scissors end. - 30 in. removable handle for ease of pumping and storage when not in use. - - Our “fingertip control” release knob provides slow, controlled, lowering of the load.
- Safety overload valve prevents jack from being used beyond its rated capacity.
|
Norco 20 Ton Air Operated Hydraulic Floor Jack - Long handle with 36-1/2 in. reach helps in positioning jack under vehicles with low overhang. - May be stored in a vertical position. - Hand grip also works as a stand to store the jack in a vertical position. - Compact design fits easily between tandem wheels. - Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust. - Removable extension screw is used with the two 4 in. extension adapters (included) for added height when necessary. - Self-retracting ram eliminates manual lowering of the jack. - 5 1/4 in. diameter high impact composite wheels make maneuverability easy. - Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity. - Convenient push button air valve connected to an in-line filter prohibits contaminates from entering the air/hydraulic system.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 20 Ton Air Operated Hydraulic Floor Jack (Low Profile) - Long handle with 36-1/2 in. reach helps in positioning jack under vehicles with low overhang. - May be stored in a vertical position. - Hand grip also works as a stand to store the jack in a vertical position. - Compact design fits easily between tandem wheels. - Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust. - Removable extension screw is used with the two 4 in. extension adapters (included) for added height when necessary. - Self-retracting ram eliminates manual lowering of the jack. - 5 1/4 in. diameter high impact composite wheels make maneuverability easy. - Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum capacity. - Convenient push button air valve connected to an in-line filter prohibits contaminates from entering the air/hydraulic system.
|
Norco 22 Ton Air Operated Hydraulic Floor Jack - Long “T” handle helps in positioning jack under vehicles with low overhang. - Jack load release top mounted at “T” handle and allows operation at any handle position. - Handle locking lever secures handle in either vertical, horizontal or 45 degree position. - Compact design fits easily between tandem wheels. - Rust inhibitive coating on ram and extension screw. - Large diameter wheels make maneuverability easy. - Self-retracting ram eliminates manual lowering of jack. - Safety by-pass system prevents cylinder damage. - Safety overload system prevents jack from being used beyond its rated capacity. - Integrated filter protects air motor. - Fast lifting air motor. - Four removable saddles with handle mounted saddle holder included on the model 72200C (2 in and 2-3/4 in. diameter saddles, 2-1/4 in. and 4 in. extension adapter saddles).
|
Norco 30/20 Ton Air Hydraulic Telescopic Floor Jack - Long “T” handle helps in positioning jack under vehicles with low overhang. - Handle locking lever secures handle in either vertical, horizontal or 45 degree position. - Safety overload system prevents cylinder damage. - Rust inhibitive coating on rams. - Integrated filter protects air motor. - Double acting pump raises ram more quickly to the load. - Suspension loaded axle prevents wheel damage. - Vacuum operated ram retraction eliminates manual lowering of jack. - Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency. - Includes 2 in. and 3-15/16 in. stackable extensions with extension holder.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 44 Ton Air Operated Hydraulic Floor Jack - A double acting pump raises the ram more quickly to the load. - Suspension loaded axle prevents wheel damage. - Vacuum-operated ram retraction eliminates manual lowering of jack. - Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency. - Includes a 4-3/8 in. diameter saddle, 2 and 4 in. long stackable extensions and extension holder.
|
Norco 0.5 Ton Telescopic Transmission Jack
- Fully adjustable universal saddle with hand adjustable corner brackets and safety chain. - Safety overload system prevents jack from being used beyond its rated capacity. - Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission. - Two-stage flash chromed rams inhibit rust from entering hydraulic system. - Wide base with four easy rolling 4 in. diameter swivel ball bearing caster wheels, provides stability and easy maneuvering. - Polyurethane wheels provide protection for tile and epoxy floors.
|
Norco 20 Ton Air Operated Hydraulic Bottle Jack - Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity. - Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system. - Unique design allows for manual operation when air is not available. - Two piece zinc plated handle. - Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard. - Carrying handle. DIMENSIONS: Low Lift Height 10.875" High Lift Height 20.5" Stroke 6.75" Screw Extension 2.75" Base Size 6.44" x 9" P.S.I. Range 100-130 Shipping Weight 41 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 22 Ton Standard Bottle Jack - Two piece zinc plated handle. - Prevent rust with “Parkerized” pump piston, ram and extension screw. - No leak “Uniweld” construction. - 50% safety overload factor. - State of the art design reduces repair time. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Lightweight forged base provides more steel only where strength is required. - The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear. - Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
|
Norco 35 Ton Standard Bottle Jack - Two piece zinc plated handle. - Prevent rust with “Parkerized” pump piston, ram and extension screw. - No leak “Uniweld” construction. - 50% safety overload factor. - State of the art design reduces repair time. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Lightweight forged base provides more steel only where strength is required. - The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear. - Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
|
Norco 60 Ton Standard Bottle Jack - Two piece zinc plated handle. - Prevent rust with “Parkerized” pump piston, ram and extension screw. - No leak “Uniweld” construction. - 50% safety overload factor. - State of the art design reduces repair time. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Lightweight forged base provides more steel only where strength is required. - The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear. - Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 20 Ton Air Operated Hydraulic Bottle Jack (Low Profile) - Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity. - Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system. - Unique design allows for manual operation when air is not available. - Two piece zinc plated handle. - Parkerized coating on pump piston, extension screw and extension adapters and chrome coated ram offer protection against rust. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard. - Carrying handle. DIMENSIONS Low Lift Height 8.25" High Lift Height 14.5" Stroke 4" Screw Extension 2.25" Base Size 6.44" x 9" P.S.I. Range 100-130 Shipping Weight 36 lbs.
|
Norco 20 Ton Air Operated Hydraulic Bottle Jack (Ultra-Low Profile)
- Made for all applications that require a low lift height. - Fast efficient air pump reduces lifting time and has a built-in relief mechanism which prevents the jack from being used beyond its maximum allowable capacity. - Convenient push button air valve connected to an in-line filter prevents contaminates from entering the air/hydraulic system. - Unique design allows for manual operation when air is not available. - Two-piece zinc-plated handle. - Parkerized coating on pump piston and chrome coated ram offer protection against rust. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Safety bypass and overload systems prevent cylinder damage and prevent the jack from being used beyond the ASME/PASE load-limiting standard. - Carrying handle. DIMENSIONS: Low Lift Height 7.75" High Lift Height 11.75" Stroke 4" Screw Extension N/A" Base Size 6.44" x 9" P.S.I. Range 100-130 Shipping Weight 36 lbs.
|
Norco 22 Ton Standard Bottle Jack (Low Profile) -Two piece zinc plated handle. - Prevent rust with “Parkerized” pump piston, ram and extension screw. - No leak “Uniweld” construction. - 50% safety overload factor. - State of the art design reduces repair time. - Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances. - Lightweight forged base provides more steel only where strength is required. - The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear. - Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 1000 Lbs Engine Stand
- Fully adjustable engine mounting head. - Long handle and 360 degree rotating head easily position engine. - One bolt disassembles stand for transporting or storage. - Heavy wall tubing prevents excessive frame flex. - 2 rigid wheels in back and 2 swivel caster wheels in front provide maximum stability and support.
|
Norco 2500 Lbs Engine Crane
- Four position telescopic boom with 3/8 in. proof chain and swivel mounted hook. - 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads. - Low profile design (4-3/4 in. from top of legs to ground) allows positioning under low ground clearance vehicles. - Quick foldable legs and boom save shop space (22-1/2 in. x 51-3/4 in.) and prepare crane for transport or storage within seconds. - 4 in. diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.- Made In USA
|
Norco 1250 Lbs Engine Stand
- Fully adjustable engine mounting head. - Long handle and 360 degree rotating head easily position engine. - One bolt disassembles stand for transporting or storage. - Heavy wall tubing prevents excessive frame flex. - 2 rigid wheels in back and 2 locking swivel caster wheels in front provide maximum stability and support. - Four bolts disassemble stand for transporting or storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 3 Ton Air Hydraulic Engine Crane
- Multiple boom and leg extensions provide maximum stability. - Boom swivels 10 degrees right or left if base cannot be centered under the load. - Floor lock secures crane from moving when in use. - Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.
|
Norco 3 Ton Jack Stands (2) - Unique spring loaded pawl provides constant locking pressure against lifting column. - Four legged base with foot pads for added strength and a more secure footing on asphalt. - Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column. - Recessed column saddle for acceptance of vehicle panel rail (model 81004C only). - Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
|
Norco 3/4 Ton Capacity Under Hoist Stand Without Pedal - Lightweight, slender design makes handling easy, even in close quarters. - Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load. - Foot pedal (Model 81034A only) generates 1 in. additional stroke and 400 pounds of force at the saddle. - Pedal may be locked in vertical position for storage or shipment.
- 1-1/4 in. diameter acme threaded screw has 26-1/4 in. of travel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Norco 3/4 Ton Capacity Under Hoist Stand With Pedal - Lightweight, slender design makes handling easy, even in close quarters. - Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load. - Foot pedal (Model 81034A only) generates 1in. additional stroke and 400 pounds of force at the saddle. - Pedal may be locked in vertical position for storage or shipment.
- 1-1/4 in. diameter acme threaded screw has 26-1/4 in. of travel.
|
Norco 25 Ton Pin Type Jack Stands (2) - Pin type support column adjusts to four different height positions. - Adjustment pin is secured to stand to prevent loss. - Handle provides ease of positioning and carrying. - 3/8in. thick solid steel base plate for added stability.
|
Norco 1 Ton Wheel Dolly With Swivel Casters DIMENSIONS: - Lift Travel 7.5 in.
- Length 50.5 in.
- Width 44.5 in.
- Height 39 in.
- Shipping Weight 209 lbs. FEATURES: - Swivel caster wheels both fore and aft provide side to side maneuverability. - Wheels with polyurethane tread protect floor. - Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations. - Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. - Lift arms supported at both ends minimize wheel movement. - Adjustable height push bar provides unobstructed access to hub area. - 3-1/4 in. travel adjustment on rear caster wheel matches lifting arms with spindle angle.
|
|