Join our mailing list!





You are here: Home > Lifting Equipment
Choose a sub category:
Floor Jacks Bottle Jacks
Air Bottle Jacks Truck Service Jacks
Forklift Jacks Telescopic Jacks
High Tonnage Jacks Jumbo Jacks
Clutch Jacks Engine Cranes & Stands
Transmissions Jacks Underhoist Stands
Jack Stands & Plates
Sort By:
Page of 3
Norco 78600B Hein-Werner HW93806 Norco 72244
Our Price: $6,809.95
Our Price: $5,939.95
Our Price: $2,345.95
Norco 3 Ton Air Hydraulic Engine Crane
- Multiple boom and leg extensions provide maximum stability.
- Boom swivels 10 degrees right or left if base cannot be centered under the load.
- Floor lock secures crane from moving when in use.
- Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.

Hein-Werner 3 Ton Engine Crane
- Installation and removal of engines, radiators, differentials, gas tanks, etc.
- Roller bearings in wheels for ease of movement

- Swivel hook for full rotation of load

- Side swivel of boom for ease of positioning load

- Pry bar to remove weight from leg to ease movement of leg extension

- 3 boom extension position

- Made in the USA
Norco 44 Ton Air Operated Hydraulic Floor Jack
- A double acting pump raises the ram more quickly to the load.
- Suspension loaded axle prevents wheel damage.
- Vacuum-operated ram retraction eliminates manual lowering of jack.
- Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency.
- Includes a 4-3/8 in. diameter saddle, 2 and 4 in. long stackable extensions and extension holder.
Norco 72218 Hein-Werner HW93720 Hein-Werner HW93718
Our Price: $2,312.95
Our Price: $2,129.95
Our Price: $1,994.95
Norco 30/20 Ton Air Hydraulic Telescopic Floor Jack
- Long “T” handle helps in positioning jack under vehicles with low overhang.
- Handle locking lever secures handle in either vertical, horizontal or 45 degree position.
- Safety overload system prevents cylinder damage.
- Rust inhibitive coating on rams.
- Integrated filter protects air motor.
- Double acting pump raises ram more quickly to the load.
- Suspension loaded axle prevents wheel damage.
- Vacuum operated ram retraction eliminates manual lowering of jack.
- Safety button at the top of the handle can be pushed in to immediately stop the jack operation in case of emergency.
- Includes 2 in. and 3-15/16 in. stackable extensions with extension holder.
Hein-Werner 0.5 Ton Transmission Jack
- Combines air (first stage only) and hydraulic power for maximum speed and accuracy
- Four ratcheting brackets fit transmission pan flanges

- Hefty nylon safety strap helps anchor transmission

- Wide spread casters for smooth maneuverability

- Head adjustments made easy with big easy-to-grip crank handles

- Made in the USA
Hein-Werner 1 Ton Floor Style Transmission Jack
- Wishbone design allows unit more mobility
- Tubular steel frame

- 360° swivel casters

- Load restraint chain

- Designed for heavy duty transmissions

- Made in the USA
Hein-Werner HW93735A Hein-Werner HW93659 Norco 78106A
Our Price: $1,720.95
Our Price: $1,688.95
Our Price: $1,556.95
Hein-Werner 25 Ton Axle Jack
- 8 in. Low height allows lifting from axle or suspension
- Compact, powerful design quickly lifts rated capacity

- Pressure relief valve prevents overloading

- Specially coated ram prevents rust and extends jack life

- Air assisted ram retract

- 3 position handle

- 2 year warranty

- Made in the USA
Hein-Werner 4 Ton Forklift Jack
- Specially designed seals and strong steel construction
- Low pick up height

- Removable handle and compact size

- Made in the USA
Norco 2500 Lbs Engine Crane
- Four position telescopic boom with 3/8 in. proof chain and swivel mounted hook.
- 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.
- Low profile design (4-3/4 in. from top of legs to ground) allows positioning under low ground clearance vehicles.
- Quick foldable legs and boom save shop space (22-1/2 in. x 51-3/4 in.) and prepare crane for transport or storage within seconds.
- 4 in. diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.
- Made In USA

Norco 72035 Hein-Werner HW93733 Omega 43000
Our Price: $1,372.95
Our Price: $1,289.95
Our Price: $1,281.95
Norco 300 Lbs Telescopic Clutch Jack
- Tilting saddle activated by an integrated screw with machine handle enables the clutch to be positioned in either a horizontal position for clearing underneath truck or vertical position for installation and removal.
- 2 in. and 1-3/4 in. diameter spline shafts rotate 360˚ for clutch and engine alignment.
- Air/hydraulic foot pump provides hands free operation and easy, convenient lifting.
- Metered pump provides safe lowering of load.
- Two-stage flash chromed rams inhibit rust from entering hydraulic system.
- Polyurethane wheels provide protection for tile and epoxy floors.

Hein-Werner 20 Ton Axle Jack
- Lifting tractors, trucks, construction equipment, and other agricultural equipment by the axle, suspension, or frame leveling punch presses
- Compact, powerful design quickly lifts rated capacity

- Large 8” rubber wheels

- Low height allows lifting from axle or suspension

- Pressure relief valve prevents overloading

- Rapid two-speed air hydraulic action quickly advances ram to load

- Chrome plated plunger for extended jack life

- Made in the USA
Omega 1.5 Ton Floor Style Transmission Jack
- The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins
- Hydraulic system is protected from internal damage by a patented by-pass mechanism
- Rugged steel wheels and full swivel ball bearing casters
- U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
- Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load
- Load-restraining chain is vital for raising and lowering safety
- Four wheel casters allow easy movement, positioning of transmission jack

Omega 42003 Norco 71000D Hein-Werner HW93731
Our Price: $1,264.95
Our Price: $1,222.95
Our Price: $1,049.95
Omega 1 Ton Telescopic Transmission Jack
- Single-stage chrome-plated rams maximize its high reach operated by a user-friendly foot pedal
- Extra-wide base lowers center of gravity and promotes stability
- Unique handle release pedal provides safety in lowering the load
- Rugged steel wheels and full swivel ball bearing casters

Norco 10 Ton Floor Service Jack (Fast Jack)
- U.S. PATENT NUMBER: 7,055,801 B2
- Chromed ram and dust seals prevent hydraulic contamination.
- Safety by-pass and overload systems protect hydraulic block.
- Air pump models can also be operated manually.
- Includes the FASTJACK® feature which raises the jack’s lifting saddle to the load with one pump of the “T” handle.
- Locking release lever secures handle in the vertical, 45 degree or horizontal position to lower the load on all models.
Hein-Werner 20 Ton Truck Jack
- Large rubber wheels enhance mobility
- Automatic valve prevents overloading

- Extension screw permits pickup height adjustment

- Made in the USA
Norco 72000Ei Norco 72500E Omega 40500
Our Price: $1,026.95
Our Price: $898.95
Our Price: $729.95
Norco 1.5 Ton Truck Transmission Jack
- Wide chassis with open front provides:
- Wider opening for saddle and transmission to come lower to the ground for easy remova
- Efficient load distribution and stability.
- Easy access to saddle tilt knobs.
- Fully adjustable universal saddle with adjustable arms to position the transmission.
- Heavy duty chain with convenient chain tensioner secures load to the saddle.
- Safety by-pass system prevents damage to the hydraulic cylinder.
- Safety overload system prevents jack from being used beyond its rated capacity.
- Full 360 degree rotating handle operates in any position.
- Flash chromed ram inhibits rust from entering the hydraulic system.
- Four full-swivel ball bearing caster wheels for easy positioning.

Norco 0.5 Ton Telescopic Transmission Jack
- Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
- Safety overload system prevents jack from being used beyond its rated capacity.
- Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
- Two-stage flash chromed rams inhibit rust from entering hydraulic system.
- Wide base with four easy rolling 4 in. diameter swivel ball bearing caster wheels, provides stability and easy maneuvering.
- Polyurethane wheels provide protection for tile and epoxy floors.

Omega 500 Lbs Clutch Jack
- Handles 14 and 15-1/2 in. clutch assembly, removal and installation becomes a one man operation.
- 1-3/4 and 2 in. spline rotates 360°, turns side to side and vertically tilts for precise clutch alignment.
- Conveniently located release valve and 360° rotating pump handle allows precise alignment when replacing a clutch.
- 4 swivel casters maneuver jack with ease.

Norco 76560 Sunex 6622 Norco 72030B
Our Price: $719.95
Our Price: $699.95
Our Price: $698.95
Norco 60 Ton Standard Bottle Jack
- Two piece zinc plated handle.
- Prevent rust with “Parkerized” pump piston, ram and extension screw.
- No leak “Uniweld” construction.
- 50% safety overload factor.
- State of the art design reduces repair time.
- Longer wear life due to internally machined oil passages, smooth bearing surfaces and close tolerances.
- Lightweight forged base provides more steel only where strength is required.
- The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
- Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
Sunex 22 Ton Capacity at 100 PSI Air/Hydraulic Truck Jack
- Narrow chassis design fits easily between tandem wheels.
- Chassis base is contoured so wheels make contact with ground when jack is
not under load and raises them off the ground when under load to prevent damage.
- 8 in. diameter pneumatic wheels make maneuverability easy.
- Wiper seals protect hydraulic system from contaminants.
- Overload and bypass safety valves prevent the jack from being used beyond its
rated capacity and ram over extension.
- Self-retracting ram
- Lever ton "T" handle locks it in any one of three different positions.
- Release knob on top of handle operates independently of handle locking lever.
- Integrated filter protects air motor.
- Four adaptors (1.875 and 2.625 in. diameter saddles, 2 and 4 in. extension adaptors)
with handle mounted saddle holder included.
Norco 300 Lbs Floor Type Clutch Jack
- Clutch/flywheel removal and installation becomes a one man job.
- Tilting saddle enables clutch to be positioned in either horizontal position for clearing underneath truck or vertical position for installation and removal.
- Adjustment bolt on saddle aligns clutch and flywheel.
- Spline shaft rotates 360 degrees, turns left and right for clutch and engine alignment. 2 in. and 1 3/4 in. spline shafts included.
- Conveniently located release valve and 360 degree rotating pump handle allow jack to be operated in any work position.

Omega 10500 Norco 72200D Omega 25057
Our Price: $695.95
Our Price: $694.95
Our Price: $598.95
Omega 50 Ton Side Pump Bottle Jack
- Easiest accessible pumping system eliminates off-center pumping force for the most efficient operation
- Extra large base provides added stability and strength
- Serrated heat-treated saddle provides generous lifting area and secure grip
- Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
- U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
- Unique cross-type forged release valve assures positive control
- A wide, rugged base provides stability and strength
- Critical stress points are reinforced in all models for added durability and dependability
Norco 22 Ton Air Operated Hydraulic Floor Jack
- Long “T” handle helps in positioning jack under vehicles with low overhang.
- Jack load release top mounted at “T” handle and allows operation at any handle position.
- Handle locking lever secures handle in either vertical, horizontal or 45 degree position.
- Compact design fits easily between tandem wheels.
- Rust inhibitive coating on ram and extension screw.
- Large diameter wheels make maneuverability easy.
- Self-retracting ram eliminates manual lowering of jack.
- Safety by-pass system prevents cylinder damage.
- Safety overload system prevents jack from being used beyond its rated capacity.
- Integrated filter protects air motor.
- Fast lifting air motor.
- Four removable saddles with handle mounted saddle holder included on the model 72200C (2 in and 2-3/4 in. diameter saddles, 2-1/4 in. and 4 in. extension adapter saddles).
Omega 5 Ton Magic Lift Service Jack
- Innovative design of Magic Lift offers a quicker lift for professional performance-
- U.S. Patented built-in by-pass device protects hydraulic system from over pumping damage
- Metered release system allows for precise load control
- After the first pump reaches the lifting point, the jack continues with extraordinary lifting speed to raise the load to the desired height
Omega 42000C Omega 28045 Omega 41003
Our Price: $566.95
Our Price: $566.95
Our Price: $531.95
Omega 1 Ton Floor Style Transmission Jack
- The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins
- Hydraulic system is protected from internal damage by a patented by-pass mechanism
- Rugged steel wheels and full swivel ball bearing casters
- U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage
- Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load
- Load-restraining chain is vital for raising and lowering safety
- Four wheel casters allow easy movement, positioning of transmission jack


Omega 4 Ton Hydraulic Forklift Jack
- Dual lift points for various lifting applications. The lower point is for forklift truck lifts and the higher point is for most farm equipment lifts
- Precision control of lifting and lowering functions

Omega 0.5 Ton Telescopic Transmission Jack
- Chrome-plated rams maximize its high reach operated by a user-friendly foot-pedal(41000 and 42003 only)
- Extra-wide base lowers center of gravity and promotes stability
- Rugged steel wheels and full swivel ball bearing casters
- Adjustable ratchet style saddle(41001 and 41000 only)
- Unique handle release pedal provides safety in lowering the load

Omega 23221C Omega 44010 Omega 44020
Our Price: $531.95
Our Price: $526.95
Our Price: $504.95
Omega 22 Ton Air Hydraulic Truck Jack
- Quick rated capacity lift using air-actuated operation
- User friendly, self-returning spring minimizes operators effort, greatly reducing fatigue
- Inline air filter traps contaminates and protects air motor for longer life
- U.S. patented built-in by-pass device protects hydraulic system from over pumping damage
Omega 1 Ton Foldable Engine Crane
- Heavy duty welded construction with rugged reinforced tubular steel
- Metered control release valve for lowering boom at a precisely-controlled rate of speed
- Special 8 Ton hydraulic long rams are equipped with a patented built-in by-pass mechanism

Omega 2 Ton Engine Crane
- Heavy duty welded construction with rugged reinforced tubular steel
- Metered control release valve for lowering boom at a precisely-controlled rate of speed
- Special 8 Ton hydraulic long rams are equipped with a patented built-in by-pass mechanism