Join our mailing list!





You are here: Home > Tire & Wheel Specialty Equipment
Choose a sub category:
Tire Cutting Eqiupment Wheel & Tire Strobe Balancer
Tire Truer Tire Inspectors & Expandable Rims
Wheel Cleaners Tire Siping Machines
Sort By:
Page of 1
TSISSG 08.410 TSISSG 08.510 TSISSG 09.410
Our Price: $1,238.95
Our Price: $1,528.95
Our Price: $1,230.95
TSISSG Expandable Rims
- 13 to 16 in. dia. by 6 3/8 in. width Expanding Rim
TSISSG Expandable Rims
- 13 to 16 in. dia. by 8 in. width Expanding Rim
TSISSG Expandable Rims
- 14 to 17 in. dia. by 7 1/8 in. width Expanding Rim
TSISSG 10.410 TSISSG 11.410 TSISSG 12.410
Our Price: $1,347.95
Our Price: $1,595.95
Our Price: $1,622.95
TSISSG Expandable Rims
- 17 to 20 in. dia. by 8 1/4 in. width Expanding Rim
TSISSG Expandable Rims
- 20 to 22.5 in. dia. by 9 in. width Expanding Rim
TSISSG Expandable Rims
- 22 to 24.5 in. dia. by 9 in. width Expanding Rim
TSISSG 13.410 TSISSG 14.410 TSISSG 14.710
Our Price: $2,194.95
Our Price: $3,385.95
Our Price: $1,642.95
TSISSG Expandable Rims
- 20 to 22.5 in. dia. by 11 3/4 in. width Expanding Rim
TSISSG Expandable Rims
- 22 to 24.5 in. dia. by 13 3/8 in. width Expanding Rim
TSISSG Expandable Rims
- 14 to 17 in. dia. by 10 1/2 in. width Expanding Rim
TSISSG 172010 TSISSG Amermac 1200R TSISSG Amermac 405-W
Our Price: $1,701.95
Our Price: $8,531.95
Our Price: $7,612.95
TSISSG Expandable Rims
- 17 to 20 in. dia. by 10 in. width Expanding Rim
TSISSG Amermac Racing Tire Truer
- The 1200R Amermac Tire Truer is specifically designed for racing tires and racing applications.
- The 1200R produces a flat cut surface or the unit can be adjusted to cut on a camber and can produce a camber cut of up to 5 degrees.
- The 1200R Amermac Tire Truer comes with one adapter plate to your specifications.
- The 1200R Tire Truer is capable of shaving a tire up to 18" wide and wheels sizes up to 24.5 in.
- Optional Automatic Cross-Feed Control and Tire Air Lift Ramp is also available.
- Built and designed for low maintenance operation
- Built-in tire centering gauge
- Ball bearing blade motor with fixed shaft prevents tire gouging
- Automatic sharpening blade with manual override
- Safety blade guard
- Minimum set up time needed for fast one person operation
- Simple master control panel designed for easy operator use
- Large wheel weight storage tray
- Adjustable work light
- Adapter plates available to fit most wheel lug patterns
- Optional Air Jack Wheel Lifting Ramp available
- Optional Automatic Cross-Feed control available
-60 hz., 110-115 V. Single Phase
TSISSG Amermac Port Truer
- The Amermac model 405-W Porta Truer is designed to handle bus, truck, trailer, passenger car, light truck and racing tire applications.
- Fast, accurate and dependable, the heavy duty 405-W Porta Truer is designed to roll up to any vehicle and true the tire without removing the wheel.
- The versatile design means the entire job can be completed within a matter of minutes.
- Truing the tire on wheel bearings insures absolute accuracy.
- Versatile, low maintenance design
- Folding handle design for compact storage
- Built-in tire profile follower
- Cuts up to 17.5 in. wide on a 24 in. profile
- Adjustable work light
- Self sharpening blade with manual override and safety blade guard
- Includes scooter seat with wheel weight travel
- 14 foot power cord
- Self sharpening blade with manual override and safety blade guard
- Includes scooter seat with wheel weight tray
- 14 foot power cord
- 60hz., 110-115V, Single Phase
TSISSG Amermac 501-A TSISSG Amermac 525 5 Hp TSISSG SP
Our Price: $2,099.95
Our Price: $5,771.95
Our Price: $7,071.95
TSISSG Amermac Electronic Strobe Balancer
- Strobe Wheel Balancers have been around for years, and there is no more accurate way to balance a tire and wheel assembly than on the vehicle.

- When balancing a tire and wheel assembly on the vehicle you are also balancing the rotor or drum and hub assembly which insures a better balance.

- Strobe balancing a wheel and tire is more accurate than using conventional methods.

- The Amermac 501-A Electronic Strobe Balancer is the companion component to the Amermac 525 Wheel Spinner.

- The Amermac 501-A Electronic Strobe Balancer delivers fast precision balancing on the vehicle.

- No special wheel attachments are required. The flashing strobe indicator pin points exact placement of wheel weights. Balancing jobs go out faster.......you profit more!
TSISSG Amermac Heavy Duty Wheel Spinner
- The low profile 525 Amermac Wheel Spinner allows for easy access under lower body style cars and trucks.

- Completely portable the 525 Amermac Wheel Spinner will handle passenger cars all the way up to heavy duty truck applications, including rear wheels and drive duals.

- The Amermac 525 Wheel Spinner is available in either 7.5 H.P., 220 Volt, 3 Phase or 5 H.P., 220 Volt, Single Phase.

Specifications:
44 in. length x 39 in. weight x 30 in. height; 340lbs shipping weight

TSISSG Tire Siping Machine
- Designed exclusively for passenger car and light truck tires, the SP Siper is priced to fit a smaller budget.
- No accessories are required making this unit perfect for many applications.
- Designed to accommodate mounted tires the SP Siper is built to last, giving many years of dependable service.
- It's easy to operate with training provided.
- It's fast; the process takes only 3 to 4 minutes per tire to perform.
- Most tires can be Siped!
- Drivers everywhere are asking for siping because it's proven ability to increase overall tire performance.
- If you are not offering tire siping you're losing money and possibly customers.
TSISSG ST TSISSG TC50-E/G TSISSG TC55-E/G
Our Price: $7,360.95
Our Price: $9,099.95
Our Price: $13,599.95
TSISSG Saf-Tee Siper
- Designed exclusively for passenger car and light truck tires, the SP Siper is priced to fit a smaller budget.
- No accessories are required making this unit perfect for many applications.
- Designed to accommodate mounted tires the SP Siper is built to last, giving many years of dependable service.
- It's easy to operate with training provided.
- It's fast; the process takes only 3 to 4 minutes per tire to perform.
- Most tires can be Siped!
- Drivers everywhere are asking for siping because it's proven ability to increase overall tire performance.
- If you are not offering tire siping you're losing money and possibly customers.
TSISSG TC-50 Tire Cutter Gas Or Electric Powered
- The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour.
- The TC-50 is equipped with either a 9 HP B&S commercial gas engine or a 3HP, 220 single phase electric motor.
- The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal.
- The patented shear blades works on a zero clearance design for a clean cut.
- This greatly extends the blade life compared to other designs.
- Two-handle valve system keeps operator's hand away from the blades while cutting for added safety.
- The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service.
- Complete factory training is included with each TC-50 Tire Cutter.
- The TC-50 Tire Cutter is available in gas and electric power systems.
TSISSG TC-55 Tire Cutter Gas Or Electric Powered
- The TC-55 Tire Cutter is one of our most powerful passenger and light truck tire cutting units.
- Equipped with either a 10 HP, 220/440 V, 3 Phase eletric motor or a 18 HP B&S commercial gas engine with eletric start.
- The small footprint allows this workhorse to easily fit in any work area.
- TheTC-55 Tire Cutter is faster than its little brother the TC-50 Tire Cutter, and can handle high volumes of passenger or light truck size tires quickly.
- Two-handle valve system keeps operator's hand away from the blades while cutting for added safety.
- The TC-55 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service.
- The TC-55 will cut 17 in. and smaller tires into four (4) pieces at a rate up to 90 per hour.
- Tires measuring 18 and 19 in. in diameter can be quartered at a rate up to 70 tires per hour.
- Complete factory training is included with each TC-55 Tire Cutter.
- The TC 55 Tire Cutter is available in both gas and electric power systems.
TSISSG TI-95 TSISSG TI-96 TSISSG WC-15
Our Price: $5,714.95
Our Price: $7,142.95
Our Price: $4,285.95
TSISSG Tire Inspector
- The TI-95 Tire Inspector is designed to inspect non mounted passenger car and light truck tires from 13 to 20 in..
- The TI-95 Tire Inspector allows the operator to inspect tires for sidewall, tread and bead leakage on non mounted tires. - The TI-95 is also ideal for checking for tire tread separation and other tire damage.
- Quick and easy inspection is accomplished by using an expandable hub and expandable rim assemblies.
TSISSG Tire Inspector
- The TI-96 Tire Inspector is designed to inspect non mounted tires from 13 to 24.5 in. using an expandable hub and rim assembly.
- The TI-96 Tire Inspector allows the operator to inspect tires for sidewall, tread and bead leakage using a dunk test tank.
- The TI-96 is also ideal for checking for tire tread separation and other tire damage
TSISSG Passenger & Light Truck Wheel Cleaner
- The WC-15 Passenger & Light Truck Wheel Cleaner quickly and safely removes rust; debris and particle build up on the wheel bead and rim flange areas of the wheel.
- The WC-15 will clean aluminum and steel wheels from 13 to 20 in. in rim diameter and up to 12 in. wide.
- Clean bead seat and rim flange areas are necessary to insure proper seating of the tire bead and reduces the risk of air leaks at the bead.
- The WC-15 is a self contained automated unit that allows an operator to safely clean the wheel without the risk of being hit by flying debris or inhaling harmful dust.
- Enclosed cabinet has full range opening doors to allow easy placement of wheel into cabinet and on to drive rollers.
- The WC-15 has two (2) rubber coated drive rollers that protect the rim flange and allow for wheel rotation.
- Wheel face is protected from damage and scratches by a protective non marring plastic shield.
- Large capacity internal vacuum system captures particles of debris and dust that come from the wheel during the cleaning process.
- An internal 150 watt long life halogen lamps allows for proper illumination of the wheel during the cleaning process.
- Large 6 in. diameter wire brush is powered directly by 2 hp, 3450 RPM electric motor.
- A heavy duty slide system design allows proper cleaning brush position. Cleaning brush is easily positioned by two adjustable hand cranks.
- Door safety switch will not permit machine operation unless door is properly closed.
- Large viewing windows provide excellent operator view.
- UL and ULC approved
TSISSG WC-30
Our Price: $6,857.95
TSISSG Truck Wheel Cleaner
- The WC-30 Truck Wheel Cleaner quickly and safely removes rust; debris and particle build up on the wheel bead and rim flange areas of the wheel.
- The WC-30 will clean aluminum and steel wheels from 20 to 32 in. rim diameters and up to 20 in. wide, including super singles!
- Clean bead seat and rim flange areas are necessary to insure proper seating of the tire bead and reduces the risk of air leaks at the bead.
- The WC-30 is a self contained automated unit that allows an operator to safely clean the wheel without the risk of being hit by flying debris or inhaling harmful dust.
- Enclosed cabinet has full range opening doors to allow easy placement of wheel into cabinet and on to drive rollers.
- The WC-30 has two (2) rubber coated drive rollers that protect the rim flange and allow for wheel rotation.
- Wheel face is protected from damage and scratches by a protective non marring plastic shield.
- Large capacity internal vacuum system captures particles of debris and dust that come from the wheel during the cleaning process.
- An internal 150 watt long life halogen lamps allows for proper illumination of the wheel during the cleaning process.
-Large 6 in. diameter wire brush is powered directly by 2 hp, 3450 RPM electric motor.
- A heavy duty slide system design allows proper cleaning brush position. Cleaning brush is easily positioned by two adjustable hand cranks.
- Door safety switch will not permit machine operation unless doors are properly closed.
- Large viewing windows provide excellent operator view.
- UL and ULC approved
- Made in America